Connect to a wired (Ethernet) network

Connect to a wired (Ethernet) network

To set up most wired network connections, all you need to do is plug in a network cable. The network icon on the top bar should spin or pulse for a few seconds and then will change to a "socket" icon when you are connected.

If this does not happen, you should first of all make sure that your network cable is plugged in. One end of the cable should be plugged into the rectangular Ethernet (network) port on your computer, and the other end should be plugged into a switch, router, network wall socket or similar (depending on the network setup you have). Sometimes, a light beside the Ethernet port will indicate that it is plugged in and active.